VOLO Engineering wins the tender for the investigation and inspection of tunnels on the Messina – Palermo motorway
VOLO Engineering won the tender to conduct the surveys and inspections of the tunnels of the Messina – Palermo motorway, for a total of 105 km of motorway tunnels. Besides laser scanner surveys, GPR scanning and thermographic surveys, 118 km of tunnels are to be inspected in compliance with the 2020 Tunnel Inspection Manual and […]
VOLO Ingegneria si aggiudica con il Consorzio Stabile Italia Scarl e il Consorzio C.A.E.C. i servizi di progettazione esecutiva relativi al Lotto 9 per la provincia di Enna
VOLO Ingegneria si aggiudica con il Consorzio Stabile Italia Scarl e il Consorzio C.A.E.C. i servizi di progettazione esecutiva relativi al Lotto 9 per la provincia di Enna. Si tratta della procedura di massima urgenza del Presidente del Consiglio dei Ministri relativa all’accordo quadro per l’affidamento di lavori, servizi di ingegneria ed architettura per l’attuazione […]
La rivista Stil’è del quotidiano Sole 24ore parla di Volo Ingegneria
VOLO Ingegneria sulla rivista Stil’è del quotidiano Sole 24ore. Protagonisti del design del made in Italy: intervista all’Ing. Salvo Volo, technical manager e amministratore della società. Leggi la notizia a p. 81
VOLO Engineering at ECO-Med 2019 in Catania
VOLO Engineering presents its research project on environmentally sustainable permeable pavements at the ECO-Med 2019 at the Ciminiere in Catania, a great opportunity to discuss sustainability and environmental protection. International Expo at the centre of the Mediterranean. Waste Water, Energy, Pollution, Ecocrime, Green Building, sustainable transport, technological innovation. All 4 Sicilian Universities, ENEA and CNR. […]
Design and supervision of works for the new railway underpass in Terrasini
VOLO Engineering was awarded the design and supervision of the works for the new railway underpass at Km 35+539 of the PA-TP railway line. The underpass provides an “escape route” unwinding from the Lungomare Peppino Impastato and vice versa. To avoid the built-up area and also to create a rapid preferential access and connection route […]
VOLO Engineering participates in the ISO 39001:2012 “Road Traffic Safety (RTS) Management Systems” Seminar by ANCE Sicilia
VOLO Engineering participates in the ISO 39001:2012 “Road Traffic Safety (RTS) Management Systems” Seminar by ANCE Sicilia with the paper entitled: “Case Studies: Examples of Certified Companies and Innovative Road Safety Solutions”. Read the article
The management of construction work is underway at the Dente Crocicchia Junction
The management of construction work is underway at the Dente Crocicchia Junction to restore the Piano Ceci road pavement with reinforcement grids to delay the formation of induced cracks. The increase in tensile strength increases the service life of the road pavement subject to induced cracking problems due to cyclic stresses of a thermal or […]
Inauguration of the new Gymnasium in Campofiorito (PA)
Blessing and inauguration of the new Gymnasium in Campofiorito (PA) to accommodate the children of all schools present in the municipality.
VOLO Engineering joins the Prims Sicilia group
VOLO Engineering joins the Prims Sicilia group, to take part in innovation, investment and research projects. Industry 4.0 protagonist in Palermo thanks to Prims; a new network of Sicilian companies is formed, Engineer Antonello Mineo, Legal Representative Polo Industria Meccatronica Sicilia discusses the project and the characteristics of the companies taking part in it. Watch […]
Partner &
Certification
